So, it has been a while since you took a leave from your mundane daily routine and dove into something exciting and adventurous! A jungle safari is an excellent choice that takes you through wild woods, jungles, desserts, sand, rocks, and grasslands. A robust and durable jungle vehicle is what will add to your enjoyment and keep you safe when a tiger crosses by or a giraffe bends down to your car window.
If your research so far has left you confused and unable to decide, here are ten of the best vehicles for a jungle safari. Take a look before booking your ride!
1. Open 4x4 vehicles
Equipped for safari landscapes in East and South Africa, this vehicle can support up to 8 guests. Since these cars come without a roof, you can experience nature closely. Sturdy and enduring, this is a common choice for private camps.
2. Overland trucks
Apt for rough terrains, river crossings, deep trenches and potholes, overland trucks get used for longer safaris. That means the car has to be equipped to carry adequate belongings of the passengers. You can have a decent view of passing wildlife and scenery.
3. Hatch top safari cars
It is your ideal vehicle if comfort is what you are looking for! It comes with a pop-up roof option which can be closed on choice as you travel for long hours. This vehicle is suitable for regions like Uganda, Tanzania, and Rwanda. It also protects you from unexpected winds, rains and mud splashes on the way.
4. Micro busses
Packed with features like sliding windows, fire extinguishers, GPS tracking, cooler boxes and First Aid arrangement, these busses ensure you slightly more than a comfortable jungle tour.
5. Minivan safari vehicles
The minivan safari cars are a popular choice in Kenya. They are apt for long journeys. If you wish to go for one, you can check out some safari car choices provided by Illinois RV Rentals service providers.
6. Land rover defender
It is a classic choice for veteran safari travelers. This vehicle is easy to drive, and it is also sturdy and completely durable. If disturbances occur, you can fix it using few strings and a hammer. It is the fittest survivor of all safaris!
7. Land cruisers
The land cruisers range from “bare bone” models to the high-end ones that comprise of MP3 players, tinted windows for sun protection and air-conditioning. The latter is the best choice for long safaris.
8. Open game viewing vehicles
If you want to have a close-up encounter with animals, woods, the sights and sounds in a jungle, this is the best vehicle to count on. Usually driven by game drivers, this car is not suited for long distances.
9. Campervan
The campervans come with complete bed and linen, along with cooking facilities, camp chairs, and two-burner stove. It is a perfect option for a small safari group of two to three.
10. Gypsy cars
A gypsy can accommodate six people, is less noisy and runs petrol. It can manage narrow roads, which is helpful for wildlife safaris.
Jungle safaris are all about the adrenaline rush! Every safari has a different experience to offer. Safely traveling is crucial here. Choose any of these well-built, advanced and enduring jungle safari vehicles, and you will be in safe hands!
Thursday, March 22. 2018
Top 10 Vehicle Choices for You to Add More Fun and Thrill to Your Jungle Safari Trip!
Must-Have Gear For First-Time Hunters
John Madson, world-renowned naturalist, conservationist, and journalist once said: “I do not hunt for the joy of killing but for the joy of living, and the inexpressible pleasure of mingling my life however briefly, with that of a wild creature that I respect, admire and value.” Australia doesn’t sport the largest hunting population in the world with only approximately 300,000 hunters being active amongst a population of around 24 million. Despite this relatively small number of hunters, it is still considered to be a very popular sport with more and more novices joining the hunting community every year.
If you want to be a hunter, regardless of what you want to hunt, you need to invest in a few pieces of equipment that will better your chances of hitting your target while ensuring your survival in the wild. While our ancestors used to chase after their prey through forests and across savannahs, modern-day hunters can stalk theirs with relative ease thanks to an immense range of hunting-related equipment that includes nifty items such as rifle-scopes, binoculars, hunting knives and even, in case of emergency, first aid kits. As a hunter, it is important to have an understanding of the various rifles and handguns that can be used in hunting as well as the different cartridges available for each type of hunt. The choices relating to each of these (and other) items are countless but a few basic guidelines will make it easier for you to make well-educated purchasing decisions.
Hunting knives
Every hunting trip requires a good-quality hunting knife. Decent knives come in a variety of shapes and sizes. While many hunters prefer to carry around a fixed-blade knife due to its sheer cutting power, others prefer those with replaceable blades. Ideally, a hunter needs a variety of knives to perform various tasks with. A general purpose knife will serve you well when you need to cut cloth and strings or cut away at pesky branches or bush. When it comes to butchering, you can either invest in a set of downsized butcher knives or buy a singular one with interchangeable blades. An Every day carry knife (EDC) such as a Swiss Army knife is very handy for any hunter and comes with a variety of useful tools such as a screwdriver, can opener, pliers, scissors and nail file. You may want to pick a knife with a brightly-coloured handle as it is very easy to put a piece of equipment down on a rock or beside a bush and to never find it again.
Binoculars
One simply cannot go on a hunting trip without a good pair of binoculars. Great advances have been made in binocular technology in recent years with state-of-the-art models sporting features such as fog and glare resistant lenses, built-in digital cameras and rangefinders. In terms of low-light visibility and clarity, binoculars tend to outperform rifle scopes, underlining the value of investing in a good quality pair. While you don’t have to spend your life savings on any piece of hunting equipment it is recommended to not waste your time with poor-quality binoculars. A good pair will be an investment that can last you a lifetime if you look after them properly.
Riflescope
Even if you have a good pair of binoculars you are still going to need a quality rifle scope. The dawn of the riflescope has produced countless encouraging results in the shooting and hunting world. Iron sights were effective enough back in the day but they were extremely complex and not nearly as accurate as their modern-day counterparts. It has become increasingly easy to hit your target when all you have to do is magnify your target, line up the crosshairs and squeeze your trigger. When you start out hunting you may be eager to get your hands on the strongest scope you can find – don’t buy it! The more powerful a scope is, the harder it becomes to aim with it as the field of view becomes narrower. As a new hunter, it is important to stick to a magnification of around 9x.
First aid kit
Getting injured is not a possibility anyone really wants to consider but one that is of vital importance nonetheless. When you are out hunting you need to be as self-sufficient as possible, always preparing for the inevitable. A well-stocked first aid box is an absolute must to treat everything from small cuts and abrasions to possible insect stings and snake bites. Make sure you carry a range of different bandages, plasters, hand sanitizer, painkillers and water treatment drops in your kit. Chances are you may not need to use any of your emergency supplies but it is always best to be prepared for the worst.
Your first hunting trip is bound to be one of the most exciting experiences of your life. As overwhelmed as you may feel it is imperative to never compromise on your safety because of it. Make sure you are well-prepared and aim to undertake your first few trips under the watchful eye of an experienced hunter. Armed with the right equipment and equal amounts of caution and enthusiasm you are bound to love every second of your newfound hunting adventure.
Friday, March 2. 2018
Jungle Tips- Surviving in the Wilderness
There are several reality shows that are based on camping in the jungle but many people wonder what it actually feels like to live in the wilderness without cameras and TV production crews. The real world of getting close to nature through camping is one of the popular pastimes that people of all ages can enjoy.
Whether you seek a brief escape from the hustle and bustle of city life or want to test your resilience, camping provides outdoor enthusiasts with an opportunity for both simplicity and adventure. If you are planning a camping adventure, there are a number of preparations and safety tips that you can consider for wandering into the wild. There is something for everyone, including novice and seasoned campers.
Camp Housing
Pitching camp before it gets is an important jungle survival tip. You need to determine the kind of camp that is suitable for your needs. Housing may be a cabin, recreational vehicle or tent.
• Some adventurers opt to sleep in a hammock but if this is too primal for you, you can think about packing a tent that you will use during your outdoor adventure.
• While tents are typically the most basic camping shelters, their comfort can be enhanced with proper preparation. Consult an outdoor recreation specialist about the most suitable tent according to your needs. These requirements ultimately determine the quality, shape and size of the tent you choose.
• It is important to note that bigger tents are not always the best option. Try out your tent prior to traveling to ensure that avoidable problems do not arise during your camping trip. Visit https://GearLobo.com for more information.
• Extra tent poles are recommended in case the ones you have break.
• One or two windows should be slightly unzipped at night in order to minimize the amount of moisture within the tent.
• A shower curtain that is slightly smaller than the floor of your tent is useful for keeping the ground dry when it rains.
Sleeping Bag
Choose an appropriate sleeping bag for the season. Lower temperature ratings are essential for winter sleeping bags while lightweight sleeping bags are ideal for warmer months. If you plan to sleep in a tent, choose a sleeping bag that fits snugly around the feet and preserves body heat.
Sleeping bags that contain synthetic fibers are hypoallergenic and usually dry faster than those that are filled with natural materials. A long cushion or pad beneath the sleeping bag will improve your sleeping experience. Food and water are crucial for any camping trip.
Food and Water
Whether your trip consists of relaxing in the recreational vehicle and watching sunsets or mini adventures like canoeing or hiking, you will need food.
• Carry necessary and sufficient items that you will use to prepare meals. For instance, smaller groups should carry cups or bowls of meals rather than canister servings.
• If you set up camp near your car, you can use a cooler to prevent perishable foods from going bad.
• Clean water is important and unless clean tap or spring water is accessible, you should carry enough bottled water. Iodine can be used sanitize water fro questionable sources. Keep water cold by wrapping the bottle in aluminum foil.
Whether you seek a brief escape from the hustle and bustle of city life or want to test your resilience, camping provides outdoor enthusiasts with an opportunity for both simplicity and adventure. If you are planning a camping adventure, there are a number of preparations and safety tips that you can consider for wandering into the wild. There is something for everyone, including novice and seasoned campers.
Camp Housing
Pitching camp before it gets is an important jungle survival tip. You need to determine the kind of camp that is suitable for your needs. Housing may be a cabin, recreational vehicle or tent.
• Some adventurers opt to sleep in a hammock but if this is too primal for you, you can think about packing a tent that you will use during your outdoor adventure.
• While tents are typically the most basic camping shelters, their comfort can be enhanced with proper preparation. Consult an outdoor recreation specialist about the most suitable tent according to your needs. These requirements ultimately determine the quality, shape and size of the tent you choose.
• It is important to note that bigger tents are not always the best option. Try out your tent prior to traveling to ensure that avoidable problems do not arise during your camping trip. Visit https://GearLobo.com for more information.
• Extra tent poles are recommended in case the ones you have break.
• One or two windows should be slightly unzipped at night in order to minimize the amount of moisture within the tent.
• A shower curtain that is slightly smaller than the floor of your tent is useful for keeping the ground dry when it rains.
Sleeping Bag
Choose an appropriate sleeping bag for the season. Lower temperature ratings are essential for winter sleeping bags while lightweight sleeping bags are ideal for warmer months. If you plan to sleep in a tent, choose a sleeping bag that fits snugly around the feet and preserves body heat.
Sleeping bags that contain synthetic fibers are hypoallergenic and usually dry faster than those that are filled with natural materials. A long cushion or pad beneath the sleeping bag will improve your sleeping experience. Food and water are crucial for any camping trip.
Food and Water
Whether your trip consists of relaxing in the recreational vehicle and watching sunsets or mini adventures like canoeing or hiking, you will need food.
• Carry necessary and sufficient items that you will use to prepare meals. For instance, smaller groups should carry cups or bowls of meals rather than canister servings.
• If you set up camp near your car, you can use a cooler to prevent perishable foods from going bad.
• Clean water is important and unless clean tap or spring water is accessible, you should carry enough bottled water. Iodine can be used sanitize water fro questionable sources. Keep water cold by wrapping the bottle in aluminum foil.
Tuesday, February 27. 2018
How to Choose the Right Caliber Weapon When Hunting
Australia boasts around 300,000 active hunters that invest around $556,650,000 annually into the Australian economy, according to the University of Queensland. Laws that relate to hunting vary between each state or territory in Australia. Except where stipulated otherwise, however, most areas allow the hunting of species considered pests which include feral goats, feral pigs, foxes, hares and rabbits as long as the landowner’s permission is obtained. Licensing needs to be obtained for the hunting of all non-pest species including predators and game of all sizes.
While it is possible to hunt and shoot the majority of Australian game animals with a single rifle and caliber it would be extremely unwise to do so. With a range of animals that include anything from small rabbits to large buffalo a caliber that is suitable for the smaller game would have very little effect on those at the opposite end of the spectrum. The same applies when shooting a small animal with a caliber that can take out an elephant – there will be very little left to salvage off your turkey after you shot it with a high-powered rifle. A few suggestions pertaining to suitable hunting equipment will enable you to get the most enjoyment out of your hunting trip.
Hares and rabbits
The Australian rabbit population has reduced significantly over recent years but for those fortunate enough to have access to a rabbit patch a high-quality .22LR RF will do a superb job out to 90 meters. If you are able to set up a distance away from the rabbit warren and then snipe as your targets appear, an extremely accurate rimfire will be needed for clean, instant kills. Unlike rabbits, hares do not live in burrows and will dash out from their cover when you least expect it. Apart from basic hunting equipment, an avid hunter can choose from a plethora of hunting-related gadgets ranging from rangefinders to wind detectors to improve the overall hunting experience.
Feral cats, foxes and dingoes
Seen as pests by farmers who have experienced substantial lamb losses due to their predatory instincts, these hardy animals shot not be shot at with anything less than a center-fire rifle. The .17 Remington has been very popular among fox hunters for years but of late the .223 has become a more popular choice. Professional kangaroo hunters have also turned to this rifle as the job at hand gets done with readily available components.
Goats, pigs, and smaller deer
Goats can and have been shot with everything from a rimfire to a .338. Due to the fact that these animals can be found in varying terrains and at varying distances a flat shooting, hard-hitting caliber is needed to kill them rapidly and as humanely as possible. Feral hogs can be dangerous at times and clean, one-shot kills should always be the hunters’ goal. Many seasoned pig hunters consider a .308 Winchester a better choice than the standard .243 but it all boils down to personal choice in the end.
Large game
Hunters seeking out large game are fully aware of just how cunning they can be. Due to their sheer size, these animals all require being taken down with a well-placed shot from a heavy caliber. A .300 WSM caliber is said to be ideal for hunting large deer, feral donkeys and even hardy predators such as alligators and cougars. Once again personal choice is the ultimate deciding factor but comfort and factors such as bolt throw should be considered when choosing your weapon.
There is no doubt that there is a very large selection equipment available to the Australian hunter. The purpose of the above recommendations is not to favour any particular manufacturer but rather to offer valuable insight and suggestion to ensure that your next hunting trip is a memorable one. It is important to take the time to conduct sufficient research and opt for the equipment that will suit your own personal needs the best.
While it is possible to hunt and shoot the majority of Australian game animals with a single rifle and caliber it would be extremely unwise to do so. With a range of animals that include anything from small rabbits to large buffalo a caliber that is suitable for the smaller game would have very little effect on those at the opposite end of the spectrum. The same applies when shooting a small animal with a caliber that can take out an elephant – there will be very little left to salvage off your turkey after you shot it with a high-powered rifle. A few suggestions pertaining to suitable hunting equipment will enable you to get the most enjoyment out of your hunting trip.
Hares and rabbits
The Australian rabbit population has reduced significantly over recent years but for those fortunate enough to have access to a rabbit patch a high-quality .22LR RF will do a superb job out to 90 meters. If you are able to set up a distance away from the rabbit warren and then snipe as your targets appear, an extremely accurate rimfire will be needed for clean, instant kills. Unlike rabbits, hares do not live in burrows and will dash out from their cover when you least expect it. Apart from basic hunting equipment, an avid hunter can choose from a plethora of hunting-related gadgets ranging from rangefinders to wind detectors to improve the overall hunting experience.
Feral cats, foxes and dingoes
Seen as pests by farmers who have experienced substantial lamb losses due to their predatory instincts, these hardy animals shot not be shot at with anything less than a center-fire rifle. The .17 Remington has been very popular among fox hunters for years but of late the .223 has become a more popular choice. Professional kangaroo hunters have also turned to this rifle as the job at hand gets done with readily available components.
Goats, pigs, and smaller deer
Goats can and have been shot with everything from a rimfire to a .338. Due to the fact that these animals can be found in varying terrains and at varying distances a flat shooting, hard-hitting caliber is needed to kill them rapidly and as humanely as possible. Feral hogs can be dangerous at times and clean, one-shot kills should always be the hunters’ goal. Many seasoned pig hunters consider a .308 Winchester a better choice than the standard .243 but it all boils down to personal choice in the end.
Large game
Hunters seeking out large game are fully aware of just how cunning they can be. Due to their sheer size, these animals all require being taken down with a well-placed shot from a heavy caliber. A .300 WSM caliber is said to be ideal for hunting large deer, feral donkeys and even hardy predators such as alligators and cougars. Once again personal choice is the ultimate deciding factor but comfort and factors such as bolt throw should be considered when choosing your weapon.
There is no doubt that there is a very large selection equipment available to the Australian hunter. The purpose of the above recommendations is not to favour any particular manufacturer but rather to offer valuable insight and suggestion to ensure that your next hunting trip is a memorable one. It is important to take the time to conduct sufficient research and opt for the equipment that will suit your own personal needs the best.
Thursday, February 8. 2018
How To Install Your Fish Finder
Are you a diehard fisherman or a weekend cruiser? A fish finder is one of the most important tools used for a catfish boat. It is one of the tools on which you can rely and can’t imagine fishing without this tool. Locating a catfish can be tedious for most people, while most people use their gut to locate and catch a catfish, you can learn to how to install your fish finder correctly and use it to catch a catfish.
Steps to install a fish finder
Mounting the Transducer- Before installing a fish finder, you need to select the right position from where the viewing angle is perfect. Installation of the transducer is quite easy and it is the most important thing that needs to be installed first. Also, it makes the positioning of the receiver much simpler. It can be installed in different ways like you can use a transom mount, mount it on the hull of your craft. You can also use a portable suction mount when it comes to mounting a transducer. Spotting the right location for transducer can be taken into consideration various factors like the flow of water when the boat is moving, how does the water move through the bottom of the boat and if there are any cracks that can cause further turbulence. Transducer works well when under in contact with water or in submerged condition while at the same time it must be kept in such a way it should not get damaged if handled roughly.
Receiver
After the installation of the transducer, you need to install the receiver. There is a lot of cable work in the installation of a wired fish finder and you need to inspect and find the place and position of your display. Ensure that both should be kept closely. Also, you need to check the wiring of holes or inserts. Most of the boats have small holes to arrange your cables, wires, and ropes depending on your wire organization. After properly organizing your wires, you need to connect transducer and receiver. Check the instruction manual for better understanding. You can also use a mounting bracket to screw and place your receiver. You can also apply adhesive to mount the receiver and use removable brackets if you wish to remove any specific tool.
Installation of Fish Finder is the foundation to success
A fish finder will completely change your approach to fishing. Unfortunately, most people dive into purchasing a new fish finder while not having an ideal how to install it or check whether it has been installed correctly or not. Without the proper installation of the fish finder, you will not be able to get clean images in the finder and it might keep you away from seeing an actual fish. Many people opt to purchase a sonar unit by themselves and rely on others to install them without having a clear understanding of how it can be done correctly. Below are some of the tips by which you can install your fish finder correct and get the best performance.
Register your product
As you unbox your sonar unit, it is important to register your product through valid email ID and contact. Registering your product will activate warranty with the manufacturer and gives you a chance to contact them in case of any important alerts and updates.
Update your fish finder software
Fish finder technology is quite advanced and needs to be consistently updated to improve compatibility and performance with other products like smartphones and other electronic systems. Marine electronics is no different than updating an application and software. These devices need to be constantly connected to the internet and updated with latest software and application so that it keeps functioning properly. Before starting your installation, you must check software and ensure that it is on latest version so that you are installing the right application. It’s likely that since you have bought a new product, you may need to perform updates before installation.
Power requirement and interference
To ensure the good clean functioning of sonar unit, you need to have an adequate power source and unit. There should be a fuse between the power source and main unit to protect the circuit. Various ways are there by which power source installation can do. Another common issue associated with sources is that there is the possibility of interference from different areas. You can install a ferrite ring to resolve such interferences and it can be purchased online from different retailers.
Conclusion
Installing a fish finder will not be a difficult task if you follow this article about how to install your fish finder. All complex, technical and complicated stuff is left for the people to understand but here in this article, more simplified version, tips, and tricks are explained for the better understanding. So, we recommend using this technique and tips for installing your fish finder.
Author’s Bio
Hi, I’m Harry Ronsen. I’m a super duper mega hiking enthusiast, with a love for everything that has to do with outdoors, hiking, gear, footwear, Fishing and more.
I’ve lived all over the place, because I love travel and there’s no end to my love for just getting around.
Over here at the GuidanceSports.Com, I do my utmost best to write the most helpful reviews of all sorts of Fishing. It started out with hiking , but I soon expanded into reviewing other kinds of outdoors , such as shoes for playing basketball, cross training, nursing shoes, shoes for standing up for long hours, working shoes, etc.
Steps to install a fish finder
Mounting the Transducer- Before installing a fish finder, you need to select the right position from where the viewing angle is perfect. Installation of the transducer is quite easy and it is the most important thing that needs to be installed first. Also, it makes the positioning of the receiver much simpler. It can be installed in different ways like you can use a transom mount, mount it on the hull of your craft. You can also use a portable suction mount when it comes to mounting a transducer. Spotting the right location for transducer can be taken into consideration various factors like the flow of water when the boat is moving, how does the water move through the bottom of the boat and if there are any cracks that can cause further turbulence. Transducer works well when under in contact with water or in submerged condition while at the same time it must be kept in such a way it should not get damaged if handled roughly.
Receiver
After the installation of the transducer, you need to install the receiver. There is a lot of cable work in the installation of a wired fish finder and you need to inspect and find the place and position of your display. Ensure that both should be kept closely. Also, you need to check the wiring of holes or inserts. Most of the boats have small holes to arrange your cables, wires, and ropes depending on your wire organization. After properly organizing your wires, you need to connect transducer and receiver. Check the instruction manual for better understanding. You can also use a mounting bracket to screw and place your receiver. You can also apply adhesive to mount the receiver and use removable brackets if you wish to remove any specific tool.
Installation of Fish Finder is the foundation to success
A fish finder will completely change your approach to fishing. Unfortunately, most people dive into purchasing a new fish finder while not having an ideal how to install it or check whether it has been installed correctly or not. Without the proper installation of the fish finder, you will not be able to get clean images in the finder and it might keep you away from seeing an actual fish. Many people opt to purchase a sonar unit by themselves and rely on others to install them without having a clear understanding of how it can be done correctly. Below are some of the tips by which you can install your fish finder correct and get the best performance.
Register your product
As you unbox your sonar unit, it is important to register your product through valid email ID and contact. Registering your product will activate warranty with the manufacturer and gives you a chance to contact them in case of any important alerts and updates.
Update your fish finder software
Fish finder technology is quite advanced and needs to be consistently updated to improve compatibility and performance with other products like smartphones and other electronic systems. Marine electronics is no different than updating an application and software. These devices need to be constantly connected to the internet and updated with latest software and application so that it keeps functioning properly. Before starting your installation, you must check software and ensure that it is on latest version so that you are installing the right application. It’s likely that since you have bought a new product, you may need to perform updates before installation.
Power requirement and interference
To ensure the good clean functioning of sonar unit, you need to have an adequate power source and unit. There should be a fuse between the power source and main unit to protect the circuit. Various ways are there by which power source installation can do. Another common issue associated with sources is that there is the possibility of interference from different areas. You can install a ferrite ring to resolve such interferences and it can be purchased online from different retailers.
Conclusion
Installing a fish finder will not be a difficult task if you follow this article about how to install your fish finder. All complex, technical and complicated stuff is left for the people to understand but here in this article, more simplified version, tips, and tricks are explained for the better understanding. So, we recommend using this technique and tips for installing your fish finder.
Author’s Bio
Hi, I’m Harry Ronsen. I’m a super duper mega hiking enthusiast, with a love for everything that has to do with outdoors, hiking, gear, footwear, Fishing and more.
I’ve lived all over the place, because I love travel and there’s no end to my love for just getting around.
Over here at the GuidanceSports.Com, I do my utmost best to write the most helpful reviews of all sorts of Fishing. It started out with hiking , but I soon expanded into reviewing other kinds of outdoors , such as shoes for playing basketball, cross training, nursing shoes, shoes for standing up for long hours, working shoes, etc.
Wednesday, January 31. 2018
Coming Head to Head with Large Cats
Large cats are beginning to move across the country, so meeting one while out on the hunt is a possibility. While many of us know how to handle an encounter with bears or snakes, most of us are lacking in large cat knowledge. It’s important to brush up on these majestic animals and know how to handle one if you find yourself competing for prey.
Understanding a Wild Cat’s Habits
Most wild cats are nocturnal, though some may be slightly active during the day. This means that a sighting in the middle of the day does not necessarily mean the animal is acting out of the ordinary. The wild cat acts similar to a domesticated cat, naturally. This means that he will give chase, just as a housecat with a mouse. These cats have a wide hunting territory, and will try to protect it when threatened. They will attack if cornered, but will be quicker to retreat if they are intimidated by their adversary. As long as the animal is not sick with a disease such as rabies, it would prefer to make an escape over attacking. However, these animals are still deadly and must be considered extremely dangerous.
How to Handle Large Cats
The state of Idaho has experienced a growing large cat population, and has issued basic guidelines for handling the predators. According to the latest publication, it is never wise to “play dead” around these animals. If the cat is hungry enough, he will consider you easy prey. Instead, make yourself look big while slowly and carefully backing away. Raise your arms above your head and stand as tall as possible. Back away slowly, but don’t run. Again, the cat will chase you as if you were a house mouse. If you happen to have your camping backpack handy, use it to protect yourself, by placing it slowly in front of you. Another option is to place it on the ground carefully as you make your slow escape. You can come back for it when the cat has left. If possible, back away and give the cat plenty of room to retreat. When the cat realizes you are not easy prey, he will leave in search of something easier to catch.
Encountering a large cat while hunting might be the most frightening experience of the season. However, making sure you know what to do in the face of these beasts could save your life. Keep hunting, and remember that everyone, beasts included, are only looking for dinner.
Understanding a Wild Cat’s Habits
Most wild cats are nocturnal, though some may be slightly active during the day. This means that a sighting in the middle of the day does not necessarily mean the animal is acting out of the ordinary. The wild cat acts similar to a domesticated cat, naturally. This means that he will give chase, just as a housecat with a mouse. These cats have a wide hunting territory, and will try to protect it when threatened. They will attack if cornered, but will be quicker to retreat if they are intimidated by their adversary. As long as the animal is not sick with a disease such as rabies, it would prefer to make an escape over attacking. However, these animals are still deadly and must be considered extremely dangerous.
How to Handle Large Cats
The state of Idaho has experienced a growing large cat population, and has issued basic guidelines for handling the predators. According to the latest publication, it is never wise to “play dead” around these animals. If the cat is hungry enough, he will consider you easy prey. Instead, make yourself look big while slowly and carefully backing away. Raise your arms above your head and stand as tall as possible. Back away slowly, but don’t run. Again, the cat will chase you as if you were a house mouse. If you happen to have your camping backpack handy, use it to protect yourself, by placing it slowly in front of you. Another option is to place it on the ground carefully as you make your slow escape. You can come back for it when the cat has left. If possible, back away and give the cat plenty of room to retreat. When the cat realizes you are not easy prey, he will leave in search of something easier to catch.
Encountering a large cat while hunting might be the most frightening experience of the season. However, making sure you know what to do in the face of these beasts could save your life. Keep hunting, and remember that everyone, beasts included, are only looking for dinner.
